[Need4Speed]

I need to remove the panel that includes the ash tray, mirror controls, and convertible top control. They are over due for a visit to StickyNoMore. It seems easy to remove, but I want to be sure so I don't damage anything. There is a screw under the foam rubber in the storage slot. After I remove that screw (and the ash tray & wiring), I see nothing else preventing removal - but it is still holding tight. Do I need to (gently) pry the panel out of the surrounding console with a screwdriver - like you do with the radio panel? I assume the answer is yes, but it never hurts to ask.

 

[Lorenz-06MT]

Look under that lid by the cigarette lighter and see if the ash tray will pull out and look under there

 

[Need4Speed]

Yes, I have removed the ash tray and housing from the panel, along with the wiring to the cigarette lighter. I don't see any other screws. I'm pretty sure I just need to gently pry the panel out from the surrounding console. I was just hoping that I could confirm this with someone who has done it before. Not really a big deal - I just don't want to find out the hard way if my assumption is wrong.

 

[Lorenz-06MT]

I should have read ur first post a little better. Sometimes i read to fast. I dont blame ya, id be asking to. Im not sure how to proceed from here.

 

[Catmanv2]

There's another screw under the rubber mat at the bottom of the storage compartment to the right of the mirror switches in your photo.

HTH

C