Maserati Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
For you guys wanting to upgrade your rims, here's a simple tip on how to get your car's offsets. Those figures are actually embedded/engraved behind the spokes of your stock rims.
I took out a piece of paper and 'rubbed off' the back of the spokes of one of the front rims, and one of the back rims. There will be different markings on each spoke, for example, 'Maserati'; 'BBS Italy'; etc, but what you are actually looking for are figures that says: '8J x 18 ET 63.7 (front rims) and 9.5J x 18 ET 55.5 (back rims).
So there goes, my offset for the front is 63.7, and 55.5 for the back.
Btw, I own a maserati coupe 04.. (might be different on other models).. and I'm waiting for my 19" to come. I can't wait!!
The bolt pattern is 5x108.
 

·
Registered
Joined
·
2 Posts
for some further quick info,
the code reads as follows,
i.e. 8j x 18 et 63.7
8J = rim width in inches
18 = rim diameter in inches
et 63.7 = back space/offset in mm

hope this helps others..
 

·
Premium Member
Joined
·
901 Posts
These are great tips. Thanks for posting them. I'm going to make an FAQ and I will add this to that FAQ.
 
1 - 3 of 3 Posts
Top