Maserati Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
513 Posts
for future reference

if you go to tirerack.com and select your make and model, select a rim, it will show you what the Bolt Pattern and Offset of your vehicle. tirerack only lists rims which have the same offset as your stock wheel.

the 03 Coupe is listed as having a 40mm offset
 

· Registered
Joined
·
513 Posts
my mistake

pganmol said:
the 40mm offset is not right. If you use 40mm offset wheels, the tires may rub the wheel well. Look at my previous reply. The front is about 63mm offset. Now I use 48mm offset front wheels(same width) with no rubbing issue.

Per tirerack.com, the 03 Coupe front offset is 55mm and the rear 52mm. i beleive the width of the rim has an affect on the offset. Our cars can take differing widths of wheels
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top