Maserati 75 Years History special...
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
1956-63 Fuel Inlet Banjo's Needed
Vintage MaseratiLooking for 4 original Fuel Inlet Banjo's made from 1956-1963 Any assistance where I might be able to source such a part would greatly be appreciated. Thank you- Jeff- 1
- 377
-
Front Windshield Maserati Quattroporte III fits from 1979 to 1990
Vintage Maserati:thumbsup: Maserati Quattroporte III Royale front Windshield AM330, 1979–1990 - OEM Windshield professionally pulled from a Maserati Quattroporte III 1986. - No cracks at all - Metal trim still on glass and in great shape and ready to be installed. - Vintage tint from manufacture - * Note...- 1
- 421
-
joemiami1971 · updated
-
1981 Maserati QIII correct breaker bar
Vintage MaseratiAnyone know or how to get the correct breaker bar to turn the crank shaft pully for a 1981 Maserati QIII? Seems like a typical breaker bar won’t work due to the pully not haveing the typical square hole for a ratchet. All it has are the bolts screws. Thanks in advance Joe- 0
- 70
-
joemiami1971 · updated
-
Maserati QIII - Flywheel turnes but crank shaft does not?
Vintage MaseratiHi, I put in an OEM Maserati QIII engine into another Masrerati QIII and now when trying to start it I hear and see the flywheel turn but the crankshaft of the engine does not. I do t see the pillows turn either. Did I forget something when installing the engine? ThankS Joe- 1
- 80
-
joemiami1971 · updated
-
Maserati Quattroporte III - $3500 for parts
Vintage MaseratiFirst up...the piston on cylinder 7 is cracked. A certifiable idiot dropped a nut into cylinder 7 and never said anything when trying to tune the carbs. I could cry when the mechanic told me. I have owned the car since 2000. Car has new starter from MIE, new battery, rebuilt carbs, new belts and...- 2
- 274
Join now to ask and comment!