Maserati Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
909 Posts
pitch and width is just the threads, you will probably have a number like m12 or 14, and fine pitched, but from my experience dealing with wheel shops, your best bet is to throw the wheel in the trunk, grab a bolt, and head over to the store and get one matched so you know it will work. make sure you account for any length differences.
I recently put some lonehardt (sp?) 20" wheels on a mercedes sl600 for a customer and the stock bolts were too long. the wheel shop had included some bolts with the wheels, but those were also too long, so a total of three trips later, I finally got what I needed.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top