Maserati Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hi everyone,

I bought a 2012 Granturismo S this summer and I had a lot of fun driving it around! I had no problem until 3 days ago.

I now have a CEL and I scanned the car with my Foxwell NT644 Elite.

The error read as follow:
P2402 - DTC Pump relay for anti-evaporation control system (above threshold) No information available.

I saw lot of people getting Evap errors due to faulty gas cap. I reseted the code. I made sure the gas cap was fine and I went for a drive but after ~30 minutes CEL (check engine light) is back.

I tried to search for the specific error code but I can't find anything useful.

If you have suggestions I will gladly try and report back.

Thank you everyone. I was silent but I enjoy reading this forum.

Have a nice day.
139001
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #4 · (Edited)
Message received from (scuderiacarparts): ||| Unfortunately, the part you are interested in is no longer available, meaning I won’t be able to supply it to you. |||



I then have ordered the part directly from Maserati for ~280$ CAD. Should receive next week. Will update the result here.

According to the tech this part is located on the RH rear position of the fuel tank.

Will update with the result when the part is replaced.
 
1 - 4 of 4 Posts
Top