Maserati Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
456 Posts
Discussion Starter · #1 ·
I just had a new grill installed.. the 2004 version where the emblem is not attached
to the wire mesh.

The emblem seems to have more forward movement than the old one. It seems like a clip or fasterner
was left off and the grills frame is not secure at this spot.

so if you gently pull the emblem forward from the top, the chrome grill frame lifts a bit.
It bothers me because it could inspire a not so curious person from attempting to remove
the emblem.

Could one of you guys see if your emblem has an movement. Note the emblem is very secure to
the chrome framing but the framing lifts in the area directly under/behind the emblem where the
frame meets the wire mesh.

Thanks,
 

·
Registered
Joined
·
456 Posts
Discussion Starter · #2 ·
ok, luckily I was able to test a few emblems before speaking to the service advisor.
Both coupes I checked have movement on the grill frame at this point.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top