Maserati Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
1,068 Posts
You could be low on hydraulic fluid in the CC

I would check the fluid level, you'll need AGIP CHF to fill it if needed and other than a computer reset, turn off the battery for a few minutes, you should be okay. If it shifts into N, R, 1st and 2nd, then the pump is working, but may be a little low on fluid. It's either that or out of adjustment...
 

· Registered
Joined
·
1,068 Posts
Check out page 673 and 674 in the repair manual

It provides great detail on how this all works and how to fill the pump.... If you need the manual, let me know here and I will let you borrow mine..

BTW, the manual talks about the KISS points being out of sync and only shifting from 1 to 2, etc...
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top